ULTRATOP LASUR

PRODUCT DESCRIPTION

ULTRATOP LASUR is a thick-layered varnish stain intended for decoration as well as providing long-term and effi cient protection for all types of hard and soft wood. Due to presence of UV filters it represents somewhat of a novelty in continuous protection of wood against deterioration. It gives wood surfaces a fuller appearance of noble wood types, while still keeping the wood structure clearly visible. The presence of waterrepellent agents prevents wood from entering wood pores, causing cracks or swelling of the wood.

PRESERVING WOOD

  • UV rays
  • fuller look coating
  • high transparency
  • water-repellent substances

APPLICATION

ULTRATOP LASUR needs to be stirred well prior to application! The undiluted stain should be applied in 2-3 coats on a dry, clean and dust-free surface using brush, roller or by spraying. The number of coats depends on the desired intensity of colour and exposure to weather conditions. Outdoor wood needs 2-3 coats, whereas 1-2 coats are suffi cient for indoor wood. The time interval between applying two coats needs to be 12-24 hours, depending on weather conditions. Application is not recommended at temperatures lower than +5 °C.

COVERAGE

8-10 m2 /l

AMBALAGE

0,75 l / 2,5 l / 4 l / 18 l

STORAGING

Store in a dry and ventilated room protected from direct sunlight and at temperatures from 0 °C do +25 °C.

COATING

PRESERVING WOOD Thinning is not necessary, for washing and cleaning tools use a synthetic thinner.

ASSORTMENT

  • 01 white
  • 02 colorless
  • 03 fir
  • 04 beech
  • 05 oak
  • 06 pine
  • 07 larch
  • 08 mahogany
  • 09 teak
  • 10 green
  • 11 olive
  • 12 walnut
  • 13 rose wood
  • 14 ebony wood

TECHNICAL CHARACTERISTICS