AQUAMAESTRO 2C PU
PRODUCT DESCRIPTION
AQUAMAESTRO 2C PU PARQEUT LACQUER is a two-part polyurethane water-based colourless lacquer for protection and decoration of parquet and other types of wooden surfaces.
APPLICATION
Pre-treat surface prior to application of lacquer. Surface (parquet) should be dry, free of grease, dirt and sanded (finish with 150 grit sandpaper). Remove any dust after sanding. Stir well before use. Use a clean and dry plastic container to mix the varnish and contact component in a ratio of 10:1 (AQUAMAESTRO 2C PU PARQUET LACQUER: AQUAMAESTRO CONTACT FOR 2C PU LACQUER).
The mixture should be thoroughly homogenized, leave to stand for 15 minutes, stir again and if needed, strain before application. Mixture is usable for 6-8 hours. Apply by brush or special roller in three coats (with an inter-coat drying interval of 4 hours) onto dry, sanded and dust-free parquet. Use 240-320 grit sandpaper for inter-coat sanding. The room is suitable for use 24-48 hours after the application of final coat, wash cleaning tools in water after use. Seal containers with remaining lacquer and contact component immediately after use to prevent contact with humidity in the air. For quicker surface protection of parquet and better appearance, we recommend AQUAMAESTRO ACRYLLIC PARQUET BASE LACQUER.
CONSUMPTION
0,3 l/m2 for 3 coats.
SIZE
kits for: 18 m2
individual packing: contact gloss, 0,5 l / lacquer, 5 l
