KEMOPOL PROTECT
PRODUCT DESCRIPTION
Kemopol protect is a water-based dispersion paint that has the ability to protect the inner walls against mould growth on the surface of the coating.
PREVENTS THE ONSET OF WALL MOULD
APPLICATION
First of all, protect and decorates of walls and ceilings in bathrooms, kitchens, laundries and other premises where there is an increase of moisture and condensation of water vapour. The dry film is resistant to dry wiping, but not to washing. It should be noted that Kemopol protect is applied only to prevent the formation of mould. If it is necessary to treat an already infected wall, it is necessary to apply Algenon, a chemical for repairing walls from fouling/obraštaj. The recommendation is to dry the wall well, and as as recommended, Algenon is to be diluted with water (1:5) and using a brush or roller rub it into the wall in one or two coats, depending on the degree of contamination. After 24 hours, it is necessary to wash the traces of mould from the walls using rags soaked in water. After drying the wall (24 hours), the wall is repainted using Simpra preservative basecoat (if necessary), and then Kemopolom protect in two layers. it is applied using a brush, roller or spray two coats, diluted with water to 10%. Before adding water the paint is to be stirred well! When ceasing work, the packaging containing the paint is to be sealed, and afterwards the painting equipment wash with water. It is not recommended to undertaken work at temperatures below +5 °C or above +35 °C.
COVERAGE
0.19 to 0.21 l/m2 depending on surface roughness and absorption
AMBALAGE
6 l / 15 l
DILUENT
Clean water.
ASORTIMAN
The Top Mix system for tinting provides numerous tones, and using Kemoton pigment preparations provides pastel shades. It comes in a white colour.
