FINALTERM BASIC
PRODUCT DESCRIPTION
Gray glue for gluing, spackling and reinforcing thermo-insulation panels of expanded and extruded polystyrene. Made based on natural mineral binder, fillers of 1.2 mm granulation and adequate additives.
CHARACTERISTICS
Easily applied
Great coverage
Universal application
APPLICATION
It is intended for decorative protection of façades and interior wall surfaces. Intended for gluing of thermo-insulation panels on concrete substrates, brick and extension plaster, and for placing reinforcing glass mesh on thermal insulation panels before applying the final decorative plaster in ETICS systems. Part of the FINALIT S and thermo-insulation systems. It can be used as a levelling layer on concrete surfaces, smoothing compounds, old and new mineral plasters, plywood panels, fiber-cement and gyps-cardboard boards.
The glue is applied using a notched steel trowel or spatula along the edge of a thermal insulation panel in a 5 cm wide layer, with three drops of the glue, of 10-15 cm in diameter, applied in the middle of the panel. applied in the middle of the panel. The contact area between the panel and the base should be around 40-50% of the panel’s surface area. The reinforcing is done so that a 2-3 mm layer of glue is applied onto thermal isolation panels with a notched steel trowel. Final armaturna staklena mrežica is pressed into the fresh compound with 10 cm overlaps and left to sit for 24 hours, after which another layer of glue is applied in order to achieve a finely coarse surface without grooves and other irregularities. The glue must dry completely. Finalgrund Uni primer is applied and after 24 hours, a thin layered, façade plaster of dispersive paint Immediately after finishing the work, wash the tool with water. Immediately after finishing the work, wash the tool with water. When carrying out the work, comply with construction regulations. When making the ETICS system, follow the guidelines of the Croatian Association of Thermal Facade Systems Manufacturers (HUPFAS).
CONSUMPTION
Min. 10 kg/m² (gluing, reinforcing, and spackling) depending on the type of substrate
and type of isolation material.
Levelling layer: 1-3 kg/m²
Gluing: 5-7 kg/m²
Reinforcing: 3-5 kg/m²
Double reinforcing: 4-6 kg/m²
Spackling: 1-2 kg/m²
PACKAGING
25 kg
ASSORTMENT
- grey
