FINAL silicate render
PRODUCT DESCRIPTION
Thin-layered potash glass based render. It is intended for decorative protection of façades and interior wall surfaces. It is characterised by a uniformly smooth structure. It is exceptionally water-repellent, water vapour permeable, resistant to UV radiation and weather resistant. Special additives protect it from algae and mould growth.
APPLICATION
It is used for all types of finely treated construction surfaces (fine mineral renders, fibre-cement and gyps-cardboard boards, plywood panels, concrete at least three months old) and as a topcoat in thermal-insulation systems.
COVERAGE
SZG 1,0 mm – 1,5 kg / m2 SZR 2,0 mm – 2,5 kg / m2
SZG 1,5 mm – 2,2 kg / m2 SZR 2,5 mm – 3,3 kg / m2
SZG 2,0 mm – 2,9 kg / m2
SZG 2,5 mm – 3,5 kg / m2
SIZE
25 kg
COLORS
It comes in white colour, but use of the TOP-MIX system for tinting provides a wide range of shades from our colour chart.
COATING
Surface needs to be firm, dry, smooth and clean and optimal working temperature ranges from +5 °C to +30 °C. Application surface must be treated with primer! Compound is applied manually using a stainless steel smoothing trowel -or using a machine - with thickness as close as possible to the diameter of the largest grain. Immediately or a few minutes after the application smooth the surface with circular strokes using a firm and plastic smoothing trowel.
