FINAL NANO PREMIUM render
PRODUCT DESCRIPTION
Thin-layer render based on acrylic binders. Used for decorative treatment of facades and interior wall surfaces. It has a distinct coarse striated structure whose appearance is determined by the troweling mode: circular, vertical or horizontal strokes. It is water-repellent, resistant to UV rays and weather; special supplements protect it from algae and mold.
APPLICATION
Used for all types of fine building surfaces (fine mineral plaster, gypsum plasterboard, chipboard) and as a finishing layer in thermal insulation systems.
COATING
The substrate must be smooth and clean; the working temperature above +8°C and under +30°C, relative humidity under 80%. The plaster should not be applied to a surface under direct sunshine, nor in rainy, foggy or windy weather.
Finalgrund Uni primer must be used (24 hours drying time) in a color shade of similar to that of plaster! The plaster is applied manually with a stainless steel trowel or with a machine, with the thickness of the layer as close as possible to the diameter of the thickest grain. Smooth the plaster immediately or a few minutes after application making circular strokes with a hard plastic smoothing trowel.
Protection against precipitation is required for 24 hours after application! Plaster from different production batches needs to be equalized before use!
COVERAGE
ZG 1,5 mm – 2,4 kg/m2 ZR 2,0 mm - 2,5 kg/m2
ZG 2,0 mm – 2,9 kg/m2
COLORS
Production color is white, but a wide range of shades can be obtained with the use of the TOP MIX tinting system.
THINNER
Clean water
SIZE
25 kg
