BETONTON

APPLICATION

BETONTON is intended for protection and decoration of all kinds of concrete and façade surfaces, stone, brick, salonit and similar surfaces. Surfaces to which BETONTON is to be applied needs to hard, dry, without any loose layers and clean. Concrete has to be at four weeks old. Prior to applying paint, surface needs to be impregnated using preservative basecoat or thinned paint (paint:water = 1:1). After preservative basecoat is dry, BETONTON is applied. It should not be thinned and it should be applied in two coats using brush, roller or by spraying. Wait until the first coat is completely dry before applying the second one. Optimal working temperature should not be lower than +5°C or higher than +35°C.

THINNER

It is not thinned.

COVERAGE

4-5 m²/l depending on the surface absorption and roughness.

SIZE

0,75l / 5 l / 15 l

COLOUR RANGE

It is produced in white, but applying the TOP MIX system for tinting provides a whole range of shades from our colour chart, including the colour chart of other manufacturers, and the RAL chart.